Table saws are an essential part of any professional woodworker’s toolkit and are indispensable to the serious hobbyist too. However, as any experienced woodworker will tell you, a table saw is only as good as the blade it has fitted.
If you want to improve the performance of your table saw, you need to make sure you have the best blade for the job – and if you don’t know where to start looking, here are our top picks for best table saw blades.
The Best Table Saw Blade of 2020
1. FREUD D1090X 10 inch Circular Saw Blade (Our Top Recommended)
This 10” blade from reputable manufacturer Freud is designed to be compatible with table saws as well as miter saws and circular saws. It has a 5/8” arbor and 90 teeth, making it ideal for clean, accurate cuts. It is best used to cut wood or wood composites.
One of the biggest advantages is the ultra-thin laser-cut kerf that allows you to make cuts with a high level of precision without taxing your saw – and the high quality of the blade ensures there is minimal flex, giving you the ability to cut true and straight lines.
It also includes several other useful features to improve performance levels. For example, it incorporates laser-cut stabilizing vents to increase the accuracy of the cut. It also features laser-cut heat expansion slots that allow the blade to expand when it begins to heat up.
This is an excellent blade with few downsides, but we could mention one or two minor gripes. First, it is not the cheapest option – but you expect to pay more for quality, and this blade still represents great value.
Also, some might find the teeth slightly brittle – although this isn’t really a problem if you take care of the blade and don’t use it for cutting wood that might contain nails or other impurities that will cause the teeth to snag.
All in all, a top option for anyone looking for a reliable and accurate blade for a range of cuts when working with wood. A highly recommended option.
- High-quality carbide construction – designed for extended use
- Ultra-thin laser-cut kerf – for easy, accurate cuts
- Laser-cut stabilizing vents – for extra accuracy
- Laser-cut heat expansion slots – allows blade to expand when hot
- Tri-metal shockproof brazing – designed to add durability
- Slightly expensive – although great value for this kind of quality
- Teeth brittle – may break if you subject the blade to rough treatment
2. Diablo D1050X 10 inch Combination Saw Blade
This 10” Diablo blade, also from Freud, is designed for both ripping and crosscutting. It has 50 teeth with a deep gullet after every five for more efficient dust and chip removal. The arbor size is 5/8”, and it also boasts a thin kerf for easy, accurate cuts.
As with the 90-tooth blade from the same company above, this model features many design features that help improve its performance. The laser-cut stabilizer vents reduce noise while also minimizing vibration, giving smoother, quieter operation.
The laser-cut expansion grooves allow the blade to expand naturally as it begins to heat up, allowing you to continue cutting with high levels of precision. The teeth are also carbide-tipped, meaning this blade will last longer than inferior alternatives.
Another big positive is the price – this blade sells at an extremely reasonable price point for something of this quality, making it fantastic value for money.
To throw in a couple of negatives, since it is not a specialist blade, you may find it struggles slightly with the very hardest types of wood you might need to cut. This means if you regularly need to cut very tough woods, you might be better off looking elsewhere.
Also, there is no anti-kickback feature – something older versions included. This is not a deal-breaker, but it would have made this excellent blade even better.
To summarize, a highly recommended option for anyone looking for a single blade that can be used for a wind range of applications. If that’s what you need, this is a saw blade that could be well worth considering.
- Laser-cut stabilizer vents – work to reduce noise and vibration
- Laser-cut expansion grooves – allows the blade to expand when hot
- Large gullet every 5 teeth – helps remove larger quantities of sawdust and chips
- Combination blade – works well when crosscutting or ripping
- Very reasonable price – inexpensive for a versatile, reliable blade
- Struggles slightly with thick hardwood – a specialist blade might be a better option
- No anti-kickback feature – would have made it even better
3. Diablo By Freud D1060X 10 inch Saw Blade
It boasts a Perma-Shield non-stick coating that is designed to resist heat, gumming and corrosion. It also incorporates shock resistant carbide teeth, ensuring this blade will be able to provide clean and accurate cuts for longer before needing to be replaced.
The kerf is thin, meaning you will be able to make precise cuts without straining your saw. It is also designed to reduce noise, giving you much quieter operation than many comparable blades. With 60 teeth, it makes an extra-clean cut while also minimizing grabbing.
As with other Freud blades, there is little to dislike here. One small issue is that the thin kerf does mean the blade can flex slightly, although not enough to significantly reduce accuracy.
You may also find that it causes some slight splintering with the softest woods or plywood – and if this is primarily what you need it for, you might be better off opting for an 80-tooth model instead.
To summarize, this is an ideal pick for anyone who needs a reliable finishing blade from a well-regarded manufacturer. If that’s what you’re looking for, you can hardly go wrong with this model, especially at this very reasonable price point.
- Perma-Shield non-stick coating – designed to resist heat, gumming and corrosion
- 60 teeth – produces a clean cut and minimizes grabbing
- Quiet operation – a blade made to run as quietly as possible
- Thin kerf – makes easy cuts without over-working your saw
- Shock-resistant carbide teeth – made to last
- Slight flex – although not enough to significantly affect your work
- May cause splintering in softer woods – maybe best to go for more teeth for this
4. DEWALT DW3196 7-1/4-Inch Finishing Saw Blade
It is made of tungsten carbide, meaning the teeth will stay sharp for longer, extending the working life of this blade. It also features an anti-stick coating that helps minimize friction and gumming, increasing ease of use and efficiency.
It is a thin-kerf blade, allowing you to make precise cuts without overworking your saw. We also like the ribbed heat vents that allow for cooler operation, which in turn helps to reduce flexing and biding as you work.
Having said that, this blade still shows a certain amount of flex, especially when working with harder woods or while making longer cuts. If extreme accuracy is important for your work, you might prefer to look at other more expensive options.
Also, anyone considering buying this blade should realize it is not a high-end pick – it is intended as a budget-friendly finishing blade. If you prefer a top-end model, you will have to expect to pay more than this blade costs.
Overall, a solid option for anyone looking for a decent finishing blade at the lower end of the price range. If you are looking for something that won’t break the bank and don’t need a blade of the highest quality, this offering from DeWalt should be of interest.
- Made of tungsten carbide – stays sharper for longer
- Anti-stick coating – minimizes friction and gumming up for smooth operation
- Ribbed heat vents – runs cooler, reducing flex and binding
- Thin kerf – cuts effortlessly without causing the saw to labor
- Very low price point – an excellent budget-friendly option
- Can suffer from flex – despite design features to minimize this
- Not a high-end blade – designed as an inexpensive finishing blade
5. Oshlun SDS-0842 8-Inch table saw blade
This is a set of dado blades from Oshlun. The blades feature a standard 5/8 arbor, and the set includes two 42-tooth blades as well as six chippers. This set will allow you to cut a range of dadoes, with dimensions from ¼” to 29/32”.
The blades are made of professional-grade C-4 carbide and feature precision ground carbide tips. They are suitable for use with all kinds of wood, including softwood, hardwood and ply – they will be able to cut clean and precise dadoes in any of these wood types with ease.
We like that the chippers are designed to offer low-vibration operation – this is achieved by employing a full-body chipper design rather than the more common wing-style chipper design.
Another big positive is the cost – while the price might seem a little high, when you consider everything included in this kit, this set is a real bargain.
However, there are a couple of minor negatives too. The kit is advertised as coming with a storage box – although, in reality, it is simply a cardboard box that doesn’t add much value.
Also, there is a lack of clear instructions with the kit. While this might not be a problem for confirmed woodworkers, it isn’t so helpful for woodworking beginners who don’t know how to set up and use these blades correctly.
To sum up, despite a couple of small drawbacks, this set is a great-value option for anyone who needs to add the ability to cut dadoes to their repertoire – and if that sounds like you, this is an option that is well worth considering.
- High-quality materials – made of professional-grade C-4 carbide
- Precision-ground carbide tips – for accuracy and durability
- Low-vibration operation – thanks to the full-body chippers
- Suitable for all types of wood – including softwood, hardwood and ply
- Pack of blades represents great value – reasonable price for a set
- Low-quality storage case – not a big positive as advertised
- Lack of clear instructions – makes it more difficult for novices to get started
6. Forrest WW10407125 10-Inch Saw Blade
This 10” 40-tooth blade from Forrest is a top-end all-rounder that is designed to perform well whether you are making rip cuts or crosscuts. It features a standard 5/8” arbor and an ATB (Alternate Top Bevel) tooth configuration.
This blade is made of high-quality C-4 carbide, meaning it is built to hold its sharpness for an extended period, allowing you to continue making clean and accurate cuts for longer. When it does dull, the manufacturer offers a sharpening service that returns the blade as good as new.
The 0.125 kerf can help save up to 1/8” of waste wood per cut, and with its 40 teeth, it can cut a range of woods – including ply – cleanly and with almost no chipping. It also runs quietly, meaning it will generate less noise than other similar blades in the same class.
The major downside is the price since this is not a cheap blade. However, for top-end equipment, you expect to pay top dollar, and this blade still represents decent value.
Some might also complain that it does not perform as well as specialist blades for specialist jobs – although this is to be expected in an all-round blade. If you require high-end performance in specialist applications, you are better off buying a dedicated blade for that type of use.
Overall, an excellent option for anyone looking for a blade that can make clean and accurate crosscuts and rips and who doesn’t mind spending the extra cash for high-quality equipment.
- Thin kerf – saves up to 1/8” wood loss for each cut
- Quiet operation – makes less noise than many comparable blades
- Minimal chipping when cutting ply – leaves a clean, smooth edge
- High-quality material – features C-4 carbide teeth
- Holds sharpness well – and can be returned for professional re-sharpening
- Expensive option – but reasonable for superior quality
- Not as good as specialist blades for specialist jobs – but a good all-rounder
7. Concord Blades ACB1000T100HP 10-Inch Saw Blade
This 100-tooth blade from Concord is designed for cutting all kinds of non-ferrous metals, including aluminum, brass, copper, bronze and so on, as well as plastics, plexiglass, PVC and more. It is a 10” model with a regular arbor size of 5/8”.
It features TCG tooth configuration – “Triple Chip Grind” – the best arrangement for cutting hard materials like metal. It is also made of titanium carbide, making it tough and durable and allowing it to keep its sharpness for longer.
It is designed for use with a wide range of saw types, including not only table saws but also miter saws, circular saws and more. We also appreciate the low cost. While many high-quality metal-cutting blades cost a lot, this one comes with a more budget-friendly price tag.
On the downside, this blade won’t give you the perfect smooth finish that you might expect with a more expensive option. Also, it may lose teeth if you attempt to go too fast – although if you take your time when cutting, there should be no problems.
If you are looking for an inexpensive blade that will allow you to cut a range of non-ferrous metals, this could be an obvious choice. However, if you are looking for higher quality, you might need to be prepared to pay a bit more than the price of this blade.
- TCG tooth configuration – for smooth, easy cuts
- Tough material – made of hard titanium carbide
- Suitable for many materials – non-ferrous metals, plastics and more
- Compatible with may saw types – table saw, miter saw, circular saw etc.
- Great price – represents excellent bang for your buck
- Does not give pro-grade smoothness – you may need to file edges
- Can lose teeth if you cut too fast – but fine if you take your time
If you’ve been looking for a new table saw blade, you’ll have realized that there is an almost bewildering array to choose from – and deciding which one to go for can be something of a headache. To help, we’ll start by looking at the key factors you need to pay attention to when making up your mind.
Choose a blade for the cuts you need to make
The most important thing to consider when choosing a blade for your table saw is the type of cuts you are planning to use it for. With wood, will you mostly be making crosscuts, rips or a mixture of both? Will you be making fast, rough cuts or more careful precision cuts? Or do you need to cut materials other than wood? Let’s look at these in more detail now.
Crosscutting is cutting across the grain of the wood. If you are buying a blade for crosscutting, you should choose one with a larger number of small teeth.
The number of teeth on a crosscutting blade can range from around 40 to 80 or more. Fewer teeth will allow you to cut faster but the cut will be rougher. More teeth allow you to make a smoother cut, but it will take longer to complete the job.
2. Rip cuts
Ripping is cutting along the grain of the wood. Blades for rip cuts have fewer, larger teeth than crosscutting blades. They also have deeper gullets, the space in between each tooth, allowing them to expel more sawdust and woodchips.
For making rough rip cuts, something with around 24 teeth will work well. For cleaner, more precise rips, choose something with closer to 50 teeth.
3. Combination blades
If you want to be able to make rips and crosscuts without having to change blades each time, you can opt for a combination blade. These blades can make both types of cut – but are not as good as specialist blades if you only need to rip or only need to crosscut.
A typical combination blade might have 40 small teeth and 10 big ones to give you the best of both worlds.
4. Cutting metal
If you need to cut metal, you will need a blade specially designed for the purpose. You won’t be able to cut metal with a blade intended for cutting wood.
Blades for cutting metal typically have a large number of small teeth – for example, around 100 would be normal. If you need something for cutting metal – or any other type of material, such as stone – make sure the blade you buy is the right one for the work you plan to do.
The kerf refers to the width of the groove the blade cuts – and so also the width of the blade itself. The main advantage of having a very thin blade is that it places less stress on the saw’s motor. With a narrow blade, you also waste less of the wood you are working on.
The disadvantage can be that blades with a very narrow kerf may flex, especially with cheaper models, making it harder to make accurate cuts.
If you are buying a blade with a narrow kerf, make sure that it won’t flex, allowing you to cut with the levels of precision you require.
The teeth on table saw blades are not all arranged in the same way, and some are better at certain jobs than others. Here are some of the most common types.
- ATBR – Alternate Top Bevel with Raker
These are commonly found in combination blades.
- ATB – Alternate Top Bevel
Teeth are arranged with the blades facing alternating directions. These are good for crosscutting.
- FTG – Flat Top Grind
These allow for faster cutting and are commonly found on ripping blades.
- TCG – Triple Chip Grind
A tooth configuration found on blades for cutting metals and plastics.
One essential point to check is the compatibility of any blade you are interested in with your table saw. Check your user manual for the size of blade you should be looking at along with the size of the arbor. If the blade doesn’t match your saw, you won’t be able to use it.
Many great options for a range of applications
As you can see, there is a wide range of excellent options for all kinds of purposes, and the key is to choose the blade that best meets your requirements.
Once you know what you need the blade for, it should be easy to pick the right one – and if you are still having trouble deciding, any of the blades in this review would be a great place to start looking.