7 Best Table Saw Fences of 2020 – Fence System for Your Table Saw

Table saws are extremely useful tools that any professional woodcutter or even keen hobbyist should own. However, very often the fences supplied with even the more expensive models can sometimes be lacking in quality.

Many people choose to upgrade their factory fence to a better, more accurate version, but with so many to pick from, sometimes choosing can be hard. So, to help you out, here we bring you our top picks for the best table saw fence.

Buyer’s guide

If you’re looking for a table saw fence, you’re probably wondering which factors are the most important to consider when making up your mind. Let’s have a look at some of these now.

Size and rip capacity

best table saw fence

The first thing you need to look at is the size of the fence you are buying. You need to know that the fence is the right size for your table saw, but you also need to make sure it is big enough to allow you to make the cuts you need to make. You should consider the size of the fence before you look at anything else.

Compatibility

Another vital consideration is compatibility. When looking for a table saw fences, you can narrow your search by identifying fences that can actually be fitted to your table saw.

Some fences are made to fit certain saws while others can be modified quite easily (usually by drilling a few extra holes) to make them fit. However, some fences simply don’t match with particular saws – so check this before buying.

Accuracy

table saw fence

One of the main reasons you will be thinking about buying an aftermarket fence is to improve the accuracy of the cuts you can make. This means choosing a fence that allows for high levels of precision is something you need to pay attention to.

Is the fence rigid when clamped in place or does it move? Is it easy to set up? And is it easy to repeat the same cut?

Also, check the measurements. How small are the units? Having smaller units gives you more control over the level of accuracy of the cut.

Top Pick

Delta Power Equipment Corporation Fence System

If you’re looking for an aftermarket upgrade that will combine perfectly with your Delta table saw – or that can be paired with other table saws with a little DIY modification – then this model could be just what you need.


It’s simple to install, easy to adjust and gives you the ability to make all the accurate, repeatable cuts you need for a range of woodworking applications. For these reasons, this fence comes highly recommended and is an obvious choice for our top pick.

Easy to adjust

table saw rip fence

Is the fence you are looking at easy to adjust? Can you do it quickly or will it slow down your workflow? Also, notice the numbers. Are they big enough to make them easy to read?

An important point is if the numbers are etched, written on or just stuck on. Stickers can easily peel off, and if the numbers disappear, your fence will become all but useless.

Material

What material is the fence made of? Is it made of something durable that is designed to last or will it not survive the first few knocks in the workshop before breaking? For example, stainless steel or heavy-duty aluminum are tough materials that will probably last a long time.

Accessories

table saw fence upgrade

Does it allow you to attach accessories like jigs or other attachments? You might not think you will need this if you are just starting out, but you might find it useful to have the option later.

Electric or manual?

Manual fences need to be adjusted the old-fashioned way using your hands while electric ones can be adjusted at the touch of a button.

With an electric one, you don’t need to walk around the saw to adjust it, but the adjustment can be slow – it can be faster just to make a manual adjustment yourself.

Manual or electric is a matter of personal preference – but we still prefer manual fences.

The Best Table Saw Fence of 2020

1. Delta Power Equipment Corporation Fence System (Our Top Recommended)

 

This is a well-made and accurate table saw fence from Delta that allows you to make cuts with precision of down to 1/64”.

It features a three-point locking system that allows you to quickly make changes and then fasten the fence securely in place, ensuring it is positioned perfectly parallel to the blade.

It has an easy-gliding steel tube fence body that also allows for quick and accurate adjustment and highly precise cutting ability.

It can also be removed quickly and easily, allowing you to position the fence on either side of the blade, depending on the requirements of the work you need to do.

The fence clamps to the front tube and hooks over the rear rail, meaning you can also use fence attachments if you choose.

This fence is specifically designed for Delta table saws. If you have one of the compatible models, the installation will be fast and effortless.

It can also be made to work with other types of table saw, but you may find you need to make some modifications. If this is the case, installation can be a little complicated and may take quite a bit of time – up to several hours, depending on how much work needs to be done.

However, once in place, you will find this a user-friendly and reliable fence that will allow you to make the whole range of accurate cuts you require. A great value product for something of this quality and a highly recommended option.

What We Like

  • 3-point locking system – assures fence is perfectly parallel to blade
  • Easy-gliding steel tube body – for fast, accurate cuts
  • Quick to remove – can be placed on either side of the blade
  • Compatible with fence attachments – hooks over rear rail
  • Very accurate – precise to 1/64”

What We Don't Like

  • Only fits Delta saws without modification – but can be adapted to other brands
  • Can take a while to fit – depends on the modifications required

2. Shop Fox W2005 Classic Fence With Standard Rails

 

This classic fence from Shop Fox is a sturdy and reliable piece of equipment that is designed to allow you to make highly accurate cuts with a minimum of hassle.

It features a wide right-angle design that gives the maximum amount of accuracy and support, and also include an HDPE plastic fence surface with very low friction, making sliding as easy as possible.

The single locking cam action lever allows you to make quick and easy adjustments, and the 25” maximum rip capacity will enable you to deal with a whole range of cutting applications. Extensions also exist that can increase this to 52”.

One thing we like about this fence is that it’s designed to be installed on a range of tables, and with most models, you will be able to install it with only minor modifications. It’s also built to last, featuring powder-coated paint for increased durability.

Having said that it’s easy to install, this still depends on the table saw you own – you will still have to make some modifications, and you need to make sure you do this accurately for this fence to function optimally.

Also, this is a relatively expensive option – although it is still less than fences at the top of the price range and represents great value for money.

If you need a fence you can rely on to make quick, easy and accurate cuts with a minimum of fuss, this model could be a great way to considerably upgrade your equipment without breaking the bank.

What We Like

  • Wide right-angle design – for added accuracy and support
  • Single locking cam action lever – for quick and easy adjustment
  • 25” max rip capacity – and compatible with extensions
  • Easy to install on most tables – may require minor modifications
  • HDPE plastic fence surface – provides low friction for easy sliding

What We Don't Like

  • May require modifications – need to install carefully for best results
  • Relatively expensive option – although costs much less than a top-end fence

3. Shop Fox W1410 Fence With Standard Rails

 

This is another fence from Shop Fox, this time designed for 27” tables. It is extremely easy to adjust, allowing you to set up accurate and repeatable cuts with no effort at all.

One thing we like is how the guides run on ball bearings. This makes it incredibly simple to slide the fence, facilitating adjustments even further.

Once you have your cut set up, the fence locks at both ends. This gives you increased rigidity, ensuring there is no movement and giving you an increased level of accuracy and repeatability.

We also like the fine positioning knobs that allow you to set up your cut with the utmost precision.

It is easy to install on most brand-name table saws – most the time, you will be able to do so with only minimal modification.

This fence also sells at a lower price point than the Shop Fox model we just looked up above, making this version excellent value for money – this will appeal to anyone who likes to get great bang for their buck.

One minor negative is the instruction manual – it’s poorly written and is not very clear in parts.

Another point to note is that the handle doesn’t fold down completely. This means it sticks out, and it’s easy to catch your body on it, which can be a little painful – although eventually, you learn to avoid it.

All in all, another top product from Shop Fox and at a very reasonable price too. If you’re looking to upgrade your table saw with a solid, high-quality fence, this one could be worth a look.

What We Like

  • Very easy to adjust – quickly set up highly accurate cuts
  • Guides run on ball bearings – effortless to move
  • Easy installation – fits most table saws with only minor modifications required
  • Strong and accurate – give a high level of repeatability
  • Great bang for your buck – represents excellent value for money

What We Don't Like

  • The instruction manual was poorly written – needs to be made clearer
  • The handle doesn’t fold down completely – can get in the way

4. Vega PRO 50 Table Saw Fence System (Upgrade Pick)

 

If you are looking for a professional-grade fence to upgrade the stock fence on your table saw, this system from Vega Pro could be just the thing.

It is a 42” fence bar that will let you make cuts of 50” to the right of the blade and 10” to the left, giving you plenty of scope for a range of cutting applications.

It features a micro-adjustment system that allows you to dial in your setting with extreme accuracy, and once set up, it is extremely rigid, meaning you cuts will be as accurate as you need them to be.

It is simple to install – it uses the hole pattern for the Delta Unisaw, and if you are fitting it to a compatible table, installation can be as quick as only 15 minutes.

Of course, if you are fitting it to a table that has a different configuration, making the necessary modifications might take slightly longer.

The main downside to this fence is the price tag since it’s one of the more expensive options available. However, it’s an exceptional piece of equipment and well worth the extra money if you can afford it.

The only other issue is mainly cosmetic. You may find that some of the components have not been finished properly and need a good sanding to take off the sharp edges.

However, this is not an issue that will affect the performance of this fence, and if you are looking for a top-quality product and are willing to spend the money to get your hands on it, this could be an option worth investigating further.

What We Like

  • 50” right of the blade and 10” left – big scope for a range of cuts
  • Micro-adjustment system – allows for a high level of accuracy
  • Very easy to install – only 15 minutes or so on compatible tables
  • Simple to use – intuitive operation
  • Solid product – rigid when set up and built to last

What We Don't Like

  • Finishing issues – you may find that some components need sandpapering down
  • Expensive option – one of the more expensive fences out there

5. Peachtree Woodworking PW1112 Fence (Best for the money)

 

If you own the Delta UniFence and are looking to upgrade it to a better version, this add-on fence could be a money-saving option that costs a lot less than buying a whole new fence system.

It is made of tough and durable heavy-duty aluminum and is built to last. If you are planning to use it with the Delta UniFence system, installation is a breeze. It’s just a case of sliding off the old fence and sliding on the new one.

It’s a high-quality product and one that does the job it was designed for extremely well – there’s no reason to make things more complicated than they need to be.

The extruded square designed is specifically intended to allow you to attach a whole range of jigs and fittings, making this an extremely versatile addition to your table saw.

The main problem is that it is designed only for use with the Delta UniFence system. If you don’t have that system, this may be useless to you – although it can also be made to work with other systems with a little modification. This should only be attempted if you know what you’re doing, though.

Another issue is the price. While this is a very inexpensive way to improve your table saw, it is still quite expensive for what it is – essentially a long piece of aluminum. However, since it is a lot cheaper than buying a whole new system, we think it’s money well spent.

All in all, a recommended upgrade for anyone who owns the Delta UniFence system already – and for skilled DIYers, also a useful item that could be paired with other table saws or fence systems.

What We Like

  • Made of tough material – heavy-duty aluminum
  • Simple mounting – fixes to the Delta UniFence system in only minutes
  • Affordable price – a much more budget-friendly option than some fences
  • High-quality product – simple but very effective
  • Lots of attachments possible – gives you plenty of flexibility

What We Don't Like

  • Need the Delta UniFence for it to work – although can be used for other applications
  • Expensive for what it is – essentially a long piece of aluminum

6.  Peachtree Woodworking PW1113 Table SAW Fence

 

This is a very similar item to the table saw fence by Peachtree above but in a slightly larger version. This means it shares all of the same strong points – as well as the same minor negatives.

If you have the Delta UniFence, it is quick and easy to set up. You should be able to remove the old fence and install the new one in under five minutes.

It’s made of the same heavy-duty aluminum as the smaller version, meaning its strong and durable and should last a long time.

It’s easy to use, and it will allow you to make a range of clean and accurate cuts. It can also accept a whole range of jigs and attachments, giving you a lot of extra flexibility and versatility over your cuts.

As with the shorter version, it’s a very cost-effective way of upgrading your fence – although some people might consider it to be a little pricy considering the fact that it’s not much more than a long piece of aluminum.

Since it’s designed to work with the Delta UniFence, it might not work with other table saws – although, with good DIY skills, you might be able to make use of it.

Overall, a solid, simple option that will allow you to improve your table saw without spending a fortune. A good pick if you are looking for a way to upgrade your Delta UniFence system – or if you are planning to build it into another system yourself.

What We Like

  • Quick and easy to mount – simply remove old fence and slide the new one on
  • Larger size – 43” fence
  • Less expensive way to upgrade your fence – much less than a whole new fence
  • Tough and durable – made of heavy-duty aluminum
  • Easy to use – intuitive and functional item

What We Don't Like

  • Designed only for Delta UniFence – requires some DIY adaptations for anything else
  • Steep price for what it is – although it’s still a high-quality item

7. Dewalt DW745 Table Saw Replacement Fence Assembly

 

If you own a DeWalt DW745 table saw and you need a new fence, this model is an obvious place to start looking. This fence is made specifically for that saw and fits perfectly.

It is made by DeWalt, one of the best-known and most trusted manufacturers of power tools in North America. It is a very high-quality item that lives up to this well-established reputation.

Once installed, it allows you to make a range of accurate and repeatable cuts. It is also easy to adjust.

We also like the way it is built of strong materials. This is a product that is built to last and will be serving you for many years to come.

On the downside, this is a fence that is only designed for one table saw. If you don’t own a DW745, you will probably find this fence doesn’t fit your saw – or at least not without a good deal of modification.

It is also relatively expensive, but perhaps that is to be expected of high-quality fence made by DeWalt, and we feel it is still good value for money.

As we mentioned, this is an obvious pick if you have a DW745 saw – and if that’s what you need a fence for, this one could be one of the best options you can find.

What We Like

  • Reputable brand name – DeWalt one of the best-known companies in North America
  • Fits the DW745 perfectly – made for this table saw
  • High-quality product – lives up to the DeWalt name
  • Allows you to make reliable cuts – gives a good level of accuracy
  • Tough materials – built to last

What We Don't Like

  • Only fits the DeWalt DW745 – not made to fit other saws
  • Expensive – but good quality and a brand-name company

Significant upgrade over factory fences

Since many table saws come with a sub-standard fence, the purchase of an aftermarket fence can significantly improve your ability to turn out high-quality, accurate work.

If you are looking for one to use with your table saw but you still haven’t made up your mind, any of the fences in our review would be a great place to start looking.

0 Shares
Tweet
Pin
Share