As an Amazon Associate we earn from qualifying purchases.

7 Best Table Saw Miter Gauges of 2021 – Reviews & Buyer Guides

Many table saws come with a miter gauge included, but unfortunately, the quality is often sub-standard. This means that the serious woodworker needs to look at aftermarket models to increase their capacity to make accurate and reliable cuts.

There are a lot of miter gauges out there of varying quality, and choosing the right one can be tough. To help you make up your mind, here are our top picks for best table saw miter gauge.

Quick Glance: The Best Table Saw Miter Gauge


The Best Table Saw Miter Gauge of 2021

1. Incra MITERV27 Miter V27 Miter Gauge (Best for the Money)

Incra MITERV27 Miter V27 Miter Gauge

>>>See On Amazon<<<

When it comes to miter gauges, Incra is the name against which all other models are measured. Top-end miters made by this company can be pricey, but this is a more affordable addition to their range.

It is compatible with most standard table saws, and setup is quick and painless – as long as there are no complications, you should be ready to go in about five minutes. It also features a universal mounting bracket, making it compatible with all user-made fences.

For a miter at this price point, this model will give you high levels of accuracy thanks to Incra’s AngleLOCK indexing system and the GlideLOCK miter bar.

One other positive is that this product is made in the USA – something that seems so hard to find nowadays.

There are a couple of negatives, too, however. Some people may find that this unit can be a little sloppy in the miter slot since it doesn’t fit as snuggly as you might hope. However, this is not a huge issue and is easy enough to deal with.

Also, some people might find the adjustment system a little strange and it might take a bit of getting used to.

All in all, a high-quality product but at a much more affordable price point than other miters in Incra’s range. If you want to add an Incra to your table saw setup but don’t want to break the bank, this could be a model that is worth checking out.

What We Like

  • Very easy to set up – will be ready to go in about five minutes
  • Extreme accuracy – thanks to AngleLOCK and GlideLOCK features
  • Universal mounting bracket – compatible with any user-made fence
  • Made in USA – a high-quality American-made product
  • Great value for money – a very affordable option

What We Don’t Like

  • Can be slightly sloppy in the miter slot – doesn’t fit snuggly with all saws
  • Adjustment system slightly strange – takes some getting used to

Check Current Price on Amazon


2. INCRA Miter1000/HD Miter Gauge (Our Top Recommended)

INCRA Miter1000/HD Miter Gauge

>>>See On Amazon<<<

If you like the idea of owning an Incra miter gauge but would rather go for one of their top-end models than a budget-friendly option, this product could be the one for you.

It is well-made and features heavy-duty machined and laser cut components, ensuring it will give you high levels of accuracy as well as lasting a long time.

One outstanding feature in the 180° AngleLOCK indexing system with stops with 1° spacing and special stops at 22.5°, allowing you to cut with extreme precision. It also features a telescoping fence for easy adjustments and extra flexibility over the cuts you can make.

You will find that this unit fits very snuggly in the miter slot and can be adjusted easily. It also slides smoothly on the table saw surface, helping you make perfect clean cuts.

This is a miter gauge that will allow you to make your cuts with an extremely high level of precision, making it suitable for all home use and professional-grade applications.

There is one fairly important flaw that needs to be mentioned. While this miter gauge is generally well-built and rugged, the teeth for the 1° spacing are quite delicate. If you bump it by accident, it’s possible to bend the teeth, rendering the miter gauge useless.

Another more minor issue is that it is a large and bulky item and is also a little awkwardly-shaped. This might make it a bit impractical to store when not in use, but this depends a lot on your workshop.

Overall, this is a high-quality USA-made product that will give you the ability to make cuts with a high level of accuracy. It might not be the cheapest option available, but if you don’t mind paying for quality, this is an option that should be of interest.

What We Like

  • 180° AngleLOCK indexing system – with increments of 1°
  • Heavy-duty machined and laser-cut components – for accuracy and durability
  • Telescoping fence – for more flexibility over your work
  • Extremely accurate cutting – high levels of precision for any project
  • Made in USA – a solid American-made item

What We Don’t Like

  • 1° spacing can be damaged – can bend the teeth easily
  • Large and bulky – might be awkward to store when not in use

Check Current Price on Amazon


3. Incra MITER1000SE Miter Gauge

Incra MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop

>>>See On Amazon<<<

This another of the more expensive miter gauges in the Incra range, this time the 1000SE. It features an engraved stainless-steel primary scale that is designed to last and gives you a high level of accuracy when setting up your cuts.

The patented GlideLOCK system provides six expansion points, making it quick and easy to make repeat cuts, and it features 41 laser-cut V stops, again giving high levels of accuracy.

Another positive is the 18-31” telescoping miter fence that gives you plenty of scope for dealing with a range of different sizes of wood.

In general terms, this is a very robust and sturdy miter that will stand up to a few bumps and should last a long time. The high quality of workmanship also ensures that it will allow you to achieve extremely precise cuts with perfect repeatability.

However, on the downside, the instructions that are supplied are not really up to standard and are a little confusing in places. This is surprising from a well-known company like Incra.

Also, another minor issue is that the hex key supplied for making adjustments is small and flimsy and doesn’t provide enough torque – you should count on using your own tools if you want to make the job easier.

To summarize, this is another worthy addition to Incra’s range of products. If you are in the market for an accurate, reliable and durable miter gauge, this is one that should be on your list of possibilities.

What We Like

  • Engraved stainless-steel primary scale – gives a high level of accuracy
  • 41 laser-cut V-stops – cut the most popular angles with extreme precision
  • Patented GlideLOCK system with 6 expansion points – for quick repeat cuts
  • 18-31” telescoping miter fence – gives greater flexibility on the wood you can cut
  • Robust and built to last – a sturdy miter gauge

What We Don’t Like

  • Instructions not up to standard – a little confusing and missing information
  • Provided hex key doesn’t provide enough torque – need your own tool

Check Current Price on Amazon


4. Precision Miter Gauge

Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc

>>>See On Amazon<<<

If you’re looking for options other than Incra miter gauges, this model from Fulton could be worth a look.

It features a 0.2” adjustable solid aluminum head with 13 positive stop holes for increased accuracy levels at all the most popular angles.

It is designed to be easy to adjust, so you can set up your cut quickly without slowing down your workflow. You just need to loosen the post knob handle, pull out the indexing pin, rotate the head and then release the pin and head back into place.

Other features we like include the slotted holes for adding a fence, giving extra versatility, and the metal disc on the miter bar that is designed to stop it rising when feeding stock into the saw.

There’s not much to dislike about this miter gauge. One slight negative is that the bottom surface may leave marks on your table saw – especially if you have one with an aluminum surface. Also, a cast and ground head would have been preferable to a stamped one, but this is a very minor point.

This is a miter gauge that will appeal to anyone who wants a well-made and accurate unit that won’t break the bank. If that sounds like what you are looking for, you’d do well to take this model into your consideration.

What We Like

  • 2” adjustable solid aluminum head – with 13 positive stop holes
  • Easy to adjust – make accurate adjustments in just a few seconds
  • Includes slotted holes for adding a fence – for extra versatility
  • Metal disc on steel miter bar – to prevent it from rising when feeding stock
  • Great value – low price for quality equipment

What We Don’t Like

  • Bottom surface may mark your table saw – can help by waxing
  • Stamped head – would be better if cast and ground

Check Current Price on Amazon


5. Kreg KMS7102 Table Saw Precision Miter Gauge System

KREG KMS7102 Table Saw Precision Miter Gauge System, Blue

>>>See On Amazon<<<

If you are interested in top-end precision miter gauge systems and want to check out a few brands other than Incra, this model from Kreg should be of interest.

The company boasts an extremely careful manufacturing process that means this miter is accurate to 0.003” at 6” right out of the box, meaning you don’t have to spend lots of time setting it up and calibrating it.

It features an anodized aluminum bar that has been made to be extremely straight, and it can easily be adjusted to eliminate all play in the miter slot, giving you advanced levels of accuracy in your work.

The Vernier scale allows for adjustments of 1/10° and there are positive stops at 0°, 10°, 22.5°, 30° and 45°, all of the most common measurements. It also includes a micro-adjustment system, allowing you to make changes down to 1/100°,

Although it sells at a premium price, it is a high-quality piece of equipment and still represents excellent value for money. It also comes with a lifetime guarantee, giving you the extra peace of mind that you will be able to use it for many years to come.

There are only a couple of negatives to mention. Unlike some of the Incra models, this Kreg miter gauge doesn’t have an extendable fence – this limits the size of the wood you can work with.

Also, the supplied screws are a little weak and can be damaged if you’re not careful – although this is a small issue and easy to work around.

Overall, this is a viable alternative to Incra miter gauges at the top end of the quality scale. If that’s the kind of product you’re looking for, this is another one that should be on your radar.

What We Like

  • Accurate factory calibration – ready to use out of the box
  • Anodized aluminum bar – manufactured for extreme straightness
  • Vernier scale – allows for adjustments of 1/10°
  • Positive stops at 0°, 10°, 22.5°, 30° and 45° – the most common measurements
  • Lifetime limited warranty – for complete peace of mind

What We Don’t Like

  • No extendable fence – limits the size of wood you can deal with
  • Screws supplied slightly inferior quality – may be damaged easily

Check Current Price on Amazon


6. DELTA Deluxe Miter Gauge

DELTA Deluxe Miter Gauge

>>>See On Amazon<<<

For owners of Delta table saws who are looking for a replacement miter gauge, this could be an obvious solution. It is specifically made to work with Delta table saws, and if you have a compatible model, this will fit perfectly.

It is quick and easy to install and can be adjusted to eliminate all play in the slot for increased accuracy.

It is a solidly-build, tough product that will resist a few knocks – you know you will be able to rely on this miter gauge for some years to come. It also has a comfortable rubber handle for ease of use.

It is made to be as simple to operate as possible – if you don’t like the more complicated models that have too many adjustments and just want something basic that does the job, this should be something that appeals to you.

It’s also a great value product. While there are miter gauges out there at the top end of the price range with very fine levels of precision, this model sells at a very reasonable price point and won’t burn a hole in your pocket.

The main downside, if it can be called that, is that is designed for Delta tables saws and so might not fit other models. It may work with other brands, but you may find you need to make some modifications.

All in all, a solid replacement miter gauge for Delta users and a possible option for owners of other brands too. Well worth considering.

What We Like

  • Solid miter gauge – tough and well-constructed
  • Simple to use – doesn’t include complicated features like some others
  • Great value – more affordable than top-end models
  • No play in the slot – can be adjusted to eliminate all play
  • Comfortable handle – easy to use

What We Don’t Like

  • Designed for Delta table saws – may not fit other models
  • May require modification to use with other brands – although could be possible

Check Current Price on Amazon


7. Big Horn 14600 Standard Track Miter Gauge

Big Horn 14600 3/4' x 3/8' Standard Track Miter Gauge

>>>See On Amazon<<<

If you are looking for a solid, uncomplicated miter gauge with no frills that simply gets the job done, this model from Big Horn could be worth thinking about.

It is designed to fit a standard track, making it compatible with most types of table saw. It is easy to adjust and includes positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5°, 90°, all of the most commonly used values, making it quick and easy to set up.

You can adjust the angle of the cut to an accuracy of 1°, giving you plenty of scope for making all the cuts you need.

It is well-built and made to last. It features aluminum and steel construction and also has an anodized finish, making it a tool you will be able to use for a long time to come.

On the downside, it doesn’t offer a micro-adjustment capability. If you want something that can be set to a more precise level than 1°, this might not be the right choice for you. It doesn’t offer extreme accuracy, but for most casual uses, it will be more than sufficient.

Overall, a simple, reliable miter gauge in the middle of the price range. If you want a tool you can trust but don’t need top-end levels of accuracy, this could be worth a look.

What We Like

  • Standard track – compatible with most types of table saw
  • Positive stops at the most common values – 0°, 22.5°, 30°, 45°, 60°, 67.5°, 90°
  • Built to last – aluminum and steel construction with anodized surface finish
  • Adjustments of 1° – for a good level of accuracy
  • Easy to square fence with saw – uncluttered design for simplicity

What We Don’t Like

  • Not perfect accuracy – but accurate enough for most casual uses
  • No micro-adjustment – not ideal for extreme levels of precision

Check Current Price on Amazon


Buyer’s guide

If you’re looking for the best miter gauge to pair with your table saw, here are some of the main points you should be thinking about when making up your mind.


miter gauge for table saw

The first thing you need to check with any miter gauge you are interested in is whether it will work with your table saw. Make sure you know if your table saw has a standard track size or whether it requires something less common.

There’s no point looking at miter gauges that aren’t compatible with your table saw – although some can be made to fit with a little modification.

Ease of use

table saw miter gauge reviews

One key consideration is how easy a miter gauge is to use. Some are designed to be as simple as possible with no unnecessary frills. This type of miter gauge will be simple to operate, allowing you to work quickly and easily.

Others might have more advanced features, but they still should be easy to use.

Things to look at are how easy it is to set up the cuts and how easy it is to change the angle of the cut.

One thing that can help speed up your adjustments is having a selection of positive stops. Many miter gauges have a range of positive stops for the measurements that are most commonly used, allowing you to click it into place quickly and easily.


best miter gauge

If you are looking at buying an aftermarket miter gauge, the most important thing you will be interested in is the improved level of accuracy. However, not all miter gauges offer the same levels of precision, so make sure the one you are looking at is reliable.

On the other hand, not everyone needs extreme levels of accuracy, and the most accurate gauges are the most expensive.

This means you should make sure any miter gauge you are interested in offers you the levels of accuracy you require – but you may save yourself some money by not buying a gauge that offers accuracy far beyond what you need for the kind of work you want to use it for.

Level of precision

table saw miter gauge

The level of precision of a miter gauge’s adjustments is another key feature – and this is also related to the kind of work you need to do.

For example, being able to dial in angles to within 1° will offer most people enough accuracy for their projects.

However, if you need more than this, miter gauges exist that allow you to fine-tune your cut to 1/10° or even 1/100°, for example like the Kreg miter gauge in our review below.

Build quality

The build quality is another important factor to consider. Choosing a miter gauge that has components made of high-quality materials will give you better levels of precision as well as ensuring that the miter gauge will last a long time.

Clear, easy-to-read measurements

You should make sure the measurements on the miter gauge are easy to read. If they are not, it will cause you difficulties whenever you try to set up your cut – and may even lead to you making mistakes and wasting wood.

Choose a high-quality aftermarket miter gauge for much more accurate work

If you want to significantly improve the accuracy of your work, you need a good aftermarket miter gauge to pair with your table saw. There are many options to pick from, but if you’re having trouble making up your mind, any of the products in this review would be a great place to start looking.

1 thought on “7 Best Table Saw Miter Gauges of 2021 – Reviews & Buyer Guides”

  1. You have added the overall best products, but let me know, are these gauges are usable only for table saw or we can use them for the miter saw…


Leave a Comment

We are participant in the Amazon Services LLC Associates Program. As an Amazon Associate, We earn from qualifying purchases by linking to